Inverted T-shaped bed, with the workbench moving on both sides and the center of gravity always inside the base, carrying a heavy load and maintaining long-term accuracy
Standard BT50190 outer diameter spindle, capable of strong cutting
Standard 1 °/1 toothed disc turntable (optional 0.001 °), high accuracy, large load-bearing capacity, hydraulic locking, capable of re cutting
Fully enclosed sheet metal, double door design, large front door, easy to lift upper and lower workpieces
Standard with two screw chips and one chain chip conveyor
| 项目 Item | 单位 Unit | FZY-11 |
|---|---|---|
| 控制器 controller | 西门子/三菱/发那科 Siemens/Mitsubishi/Fanuc | |
| X/Y/Z轴行程 X/YI/Z axis travel | mm | 1100/700/600 |
| 主轴端面到工作中心距离 Distance from spindle end face to working center | mm | 180-780 |
| 主轴中心到工作台面距离 Distance from spindle center to work surface | mm | 50-650 |
| 工作台尺寸 Table size | mm | 500x500 |
| 工作台数量 Number of tables | 1（选配2） 1(optional 2) | |
| T型槽 T-slot | mm | 5-18x100 |
| 工作台最大负载 Maximum table load | kg | 500 |
| 最小分割角度 Minimum division Angle | 1°(选配0.001°) | |
| 主轴转速 Spindle speed 主轴锥孔及直径 | min-1 | 1000（选配1200) 1000(optional 1200) |
| Spindle taper hole and diameter | mm | BT40/150 BT50/155 |
| 主轴传动方式 Spindle drive mode | 皮带式(选配:直联式) Beltype (optional: direct connection) | |
| 主轴功率 Spindle power | kw | 11 |
| 主轴电机转速 Spindle motor speed | min-1 | 8000 |
| 快速进给速度 Fast feed speed | mm/min | 24 |
| 切削进给速度 Cutting feed speed | 8000 | |
| 刀库形式 Tool library form | 圆盘刀臂式 Disc cutter arm type | |
| 刀库刀具数量 Number of knives in the Arsenal | mm/min | 24/30 |
| 交换时间（仅凸轮箱) Exchange time (CAM case only) | sec | 2.3 |
| 定位精度 Positioning accuracy | mm | ±0.005/300 |
| 重复定位精度 Repeated positioning accuracy | mm | ±0.003/300 |
| 电力需求 Electricity demand | kva | 40 |
| 气压需求 | kg | 5-6 |
| Barometric demand 机床尺寸 | ||
| Machine size | mm | 2800/2700/2800 |
| 机器重量 Machine weight | kg | 6500 |
电话：0752-3598895
赵生：13823289068
邮箱：zhaowei9068@163.com
网址：www.fzysz.com
地址: 广东省惠州市恵阳新圩碧桂园梅龙湖智能制造产业新城8栋
中文版
English
